Set up your own cloud-native simulation in minutes.Start Simulating Now
Tutorial - Conjugate Heat Transfer- Cooling of an electronic sink
170
0
Statistics
1 Geometry
1 Mesh
1 Simulation setup
0 Results
1 Geometry 1 Mesh 1 Simulation setup 0 ResultsAbout this project
The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.
