SimScale simulation projects by jtalavera | Page 1

jtalavera's profile

concentric cylinders with radiation, convection and conduction

Conjugate heat transfer simulation tutorial.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Evaluation of the CHT analysis of SimScale

Tutorial project for Heat transfer in a heat-sink

Tutorial for In-compressible Turbulent flow through a cyclone seperator

heat sink ad chip conjugate heat transfer investigation

Tutorial project for setting up a Multi-phase flow simulation

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

Public Profile

jtalavera's profile