Set up your own cloud-native simulation in minutes.Start Simulating Now
Prac1. Lid-Driven Cavity Problem
202
0
Statistics
0 Geometries
2 Meshes
1 Simulation setup
2 Results
0 Geometries 2 Meshes 1 Simulation setup 2 ResultsAbout this project
The lid-driven cavity problem has long been used a test or validation case for new codes or new solution methods. The problem geometry is simple and two-dimensional, and the boundary conditions are also simple. The standard case is fluid contained in a square domain with Dirichlet boundary conditions on all sides, with three stationary sides and one moving side (with velocity tangent to the side).
