SimScale simulation projects by jlengaigne | Page 1

jlengaigne's profile

Airflow generated by a rotating head in an open environment.

https://www.simscale.com/docs/tutorials/advanced-tutorial-fluid-flow-simulation-through-a-water-turbine/

This projects aims to showcase the function of a golf ball's dimples, compared to a same ball of smooth surface.
https://www.simscale.com/docs/tutorials/compressible-cfd-simulation-golf-ball/

Conjugate heat transfer modelling of rotating and heated cone.

Airflow of a rotating head in a semi-close environment.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Testing and learning for wind-tunnel modelling.
NACA012 test 1

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Laminar pipe flow analysis - Simscale tutorial
Mesh comparison.

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Public Profile

jlengaigne's profile