SimScale simulation projects by jgp7 | Page 1

jgp7's profile

thermal and wind loading of bioforge structure

Examining vapor chambers ability to spread heat from mosfets arranged in line.

Counter Current Concentric HEX with R-134a

36 mosfets generatng heat cooled via the .5 inch counter current ehat exchanger with 4 m/s flow

New cold plate design that integrates smaller pipes and counter current HEX properties

Inputting custom materials to cooling system accounting for new thermal resistance values

Cold plate structure with thermal pad and hollowed pebb to simulate air on inside of PEBB

Cold plate with thermal plate on single pebb

heat transfer and CHT simulation comparison

1 inch diameter cylinder with straighteners

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

jgp7's profile