SimScale simulation projects by jgaruccio | Page 1

jgaruccio's profile

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Compare simulation to experimental data results

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Determine advantages and disadvantages of Simscale regarding thermal, CFD, and static structural analyses

Find temperature distribution over coldplate

In this project frequency analysis of a thick cylinder is demonstrated.

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

In this project a steady-state thermal analysis of a hollow sphere using volume heat source boundary condition is demonstrated.

In this project, thermal solvers of SimScale are validated by simulating high power LED packaging with different on sink placement.

Public Profile

jgaruccio's profile