SimScale simulation projects by jaimegm16 | Page 1

jaimegm16's profile

https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-1/78755

tutorialde Step-by-Step Tutorial Session 2 - Full Car Aerodynamics

1st CFD simulation. Objective To learn and understand better the meshing process

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

Incompressible Fluid Flow analysis of two globe valves

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

This  project analyzes the aerodynamics of a spoiler

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

This meshing tutorial shows how to setup the Tetrahedral automatic, Tetrahedral parametric and the Tetrahedral with local refinements for a structural analysis simulation.




In this exercise, you will complete a laminar pipe flow analysis

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

jaimegm16's profile