Tutorial 2: Pipe junction flow

Post-processor Screenshot - PostProcessorScreenshot
Post-processor Screenshot - PostProcessorScreenshot
PostProcessorScreenshot
2D
Post-processor Screenshot - PostProcessorScreenshot
PostProcessorScreenshot
2D
Compressible 6 - Run 2 - SimulationRun
SimulationRun
3D
Compressible 6 - Run 1 - SimulationRun
SimulationRun
3D
water_impeller_assembly_asm - Geometry
Geometry
3D
5 - Geometry
Geometry
3D
AIR_BODY_2 - Geometry
Geometry
3D
AIR_BODY_ASSEMBLY_1 - Geometry
Geometry
3D
WATER_BODY_WITH_PIPE_VOLUME - Geometry
Geometry
3D
AIR_BODY - Geometry
Geometry
3D
views 159
shares 4
ishavarin
Created

almost 5 years ago

Last modified

about 2 years ago

Statistics
geometries 11 Geometries
meshes 9 Meshes
simulations 1 Simulation setup
runs 3 Results

About this project

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Start the Conversation

Default avatar

Log in to comment.

Not yet a SimScale user? Sign up.

Tutorial 2: Pipe junction flow by ishavarin | SimScale