Set up your own cloud-native simulation in minutes.Start Simulating Now
0
0
1 Geometry
1 Mesh
1 Simulation setup
0 ResultsTo submit the requirements for Plate no. 2 of Machine Design 2 (Lab) with the following guidelines: - Create a nonlinear static analysis and setup the following conditions for the model: - The bearing bracket is made up of elasto-plastic steel with the following material properties: Young's Modulus 200 GPa Poisson's Ratio 0.27 Density 7833 kg/m3 Stress-Strain Data Stress-Strain Data.csvDownload Stress-Strain Data.csv - Run the simulation and answer the questions in this assessment. - Copy - Copy
by simscalesimscale
1 Geometry 1 Mesh 1 Simulation setup 0 ResultsTo submit the requirements for Plate no. 2 of Machine Design 2 (Lab) with the following guidelines: - Create a nonlinear static analysis and setup the following conditions for the model: - The bearing bracket is made up of elasto-plastic steel with the following material properties: Young's Modulus 200 GPa Poisson's Ratio 0.27 Density 7833 kg/m3 Stress-Strain Data Stress-Strain Data.csvDownload Stress-Strain Data.csv - Run the simulation and answer the questions in this assessment. - Copy - Copy
iarguelles created this project
2 months ago
iarguelles copied this project
2 months ago
