SimScale simulation projects by hnadeem88 | Page 1

hnadeem88's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Construction these days have been progressing with time and what needs to be taken into consideration is how the companies store their data in servers. The larger the company, the larger the server(s). For almost every commercial construction project, there is always a server room that requires special HVAC treatment. 

The Goal

The goal is to set up a server room and using thermo-fluid analysis on simscale, we will run two simulations of ambient temperature and air-velocity in a server room.

Simulation one - Top and bottom inlet/outlet configuration of duct work

Simulation two - Wall inlet and outlet configuration of duct work

Goal : Create a similar simulation using top and bottom inlet / outlet configurations using convective heat transfer simulation.

Public Profile

hnadeem88's profile