Set up your own cloud-native simulation in minutes.Start Simulating Now
Wire-on-tube heat exchanger
463
0
Statistics
1 Geometry
1 Mesh
1 Simulation setup
1 Result
1 Geometry 1 Mesh 1 Simulation setup 1 ResultAbout this project
Wire-on-tube heat exchangers are more often used by refrigerator manufacturers as condensers. The refrigerant enters the tube in a vapor state and leaves the condenser in a liquid state undergoing a phase change. Thus, the temperature remains constant. The heat transfer takes place from the outer surfaces of the wires and tubes to the external environment by forced convection.
