SimScale simulation projects by harobinhood | Page 1

harobinhood's profile

This projects provides a simple example of the simulation of an airflow around a spoiler.

In this application, oxygen shall be mixed with water homogeneously. Therefore a static mixer design is analyzed regarding its mixing performance vs. the resulting pressure drop.

This project shows an example of how the internal airflow through an air intake can be analyzed.

This is a small simulation project that investigates a single-phase flow through a cyclone separator.

Two different designs of an inlet duct are analyzed regarding their aerodynamic performance.

This analysis demonstrates how an airfoil can be analyzed on the SimScale platform.

This project simulates sloshing of fuel inside a moving fuel-tank.

This project shows how design changes can reduce the pressure loss of a globe valve.

This project simulates transient wake formation behind a boat.

This project simulates the impact of sea waves against the columns of an oil-rig.

This project shows how to simulate the airflow inside an office space.

This project shows an example on how certain phenomena involved in heat exchangers can be simulated with SimScale.

The air flow around a horizontal axis wind turbine HAWT and the resulting forces on the rotor are simulated.

This project shows the mixing and moving of granular particles through a screw conveyor.


This project simulates incompressible flow through a Venturi Injector

This project simulates air flow through a Centrifugal Compressor.

The stress distribution within an impeller is analyzed under vibration load due to bearing tolerances.

This project simulates a Centrifugal Pump with a rotating mesh using Arbitrary Mesh Interface - AMI - approach.

In this simulation, the bowling strike is simulated. 

A casing of a mobile phone is tested when being dropped from 2 meters height.

This project simulates incompressible airflow in and around a stadium

This project shows an example of how the internal airflow through a suction nozzle  can be analyzed.

This project simulates the flow inside a car cabin. 

Public Profile

harobinhood's profile