Set up your own cloud-native simulation in minutes.Start Simulating Now
1
0
1 Geometry
1 Mesh
1 Simulation setup
0 Results"I'm setting up a rocket fin CFD analysis in SimScale. The fin is 100mm x 50mm x 5mm aluminum. I want to analyze flow at Mach 0.15 (50 m/s at sea level). What boundary conditions should I use? Should I use k-epsilon or k-omega turbulence model for this subsonic case?"
by slilbaekslilbaek
gyan0 created this project
18 days ago
1 Geometry 1 Mesh 1 Simulation setup 0 Results"I'm setting up a rocket fin CFD analysis in SimScale. The fin is 100mm x 50mm x 5mm aluminum. I want to analyze flow at Mach 0.15 (50 m/s at sea level). What boundary conditions should I use? Should I use k-epsilon or k-omega turbulence model for this subsonic case?"
