SimScale simulation projects by gisele_1998 | Page 1

gisele_1998's profile

Lift test on propeller blade to determine which propeller would be the most efficient

drag analysis on a basic model o f  a sphere

To observe the stresses and strains occurring ate the ends where the body is fixed and the load is applied

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Load test on the body to obtain deformations and stress occurring on the fixed position

Checking the tensile and compressive strength of the solid provided

Measure the flow rate at  the outlet ends of the pipe

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

gisele_1998's profile