SimScale simulation projects by gcleite96 | Page 1

gcleite96's profile

In this project, a CHT analysis will be done in order to assess the thermal resistance of a heat sink, as a mean of validating the simulation setup.
University: UFMG, Brazil.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Heat transfer simulation of a cooling plate used in a Formula SAE (FSAE) electric car. Done as part of the FEA in Formula Student and Formula SAE Workshop.

In this project, the behaviour of two heat sinks immersed in air, under natural convection, will be studied. This is the final project. University: UFMG, Brazil.

In this project, the behaviour of two heat sinks immersed in oil, under natural convection, will be studied. This is the final project. University: UFMG, Brazil.

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

FEA simulation of a front upright used in a Formula SAE (FSAE) car. Done as part of the FEA in Formula Student and Formula SAE Workshop.

Public Profile

gcleite96's profile