SimScale simulation projects by gchourdakis | Page 1

gchourdakis's profile

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models used in this analysis are taken from GrabCAD users who were the winners of GrabCAD 'Airplane Bearing Bracket Challenge'. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The effect of numerics on the simulation quality and convergence time.

In this project vibration analysis of jet engine is performed.

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

Homework for the Sport workshop : Session 2 
CFD analysis of a  bike tyre

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

FSAE-Workshop Session-3 Homework project for aerodynamics of full car

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-1/52675

Handout project for the Sports Aerodynamics Workshop : Homework for Session 1 
(27th March 2017 )

Handout  for Sports Aerodynamics Workshop: Session 3

Linear & Nonlinear Static Analysis Test case

This project demonstrates the usage of rotating zones

Public Profile

gchourdakis's profile