SimScale simulation projects by ftjulkins | Page 1

ftjulkins's profile

Another attempt at visualising flow in a 3 microneedle array

A new design of the bone anchored device. Defeatured to  reduce computational load.

Polymer matrix with embedded spheres. Mechanical simulation to demonstrate stress risers.

Testing the stress concentration of the new bone anchored device

analysis of a spacer to be used with ITAP

Related to step-by-step tutorial of the biomedical workshop (session 2) https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-2-analysis-of-cardiovascular-stent/36862

Multimaterial FDM test sample fro strain gauge applications.

Trying out a new designed that has been modified for easier 3D printing

Test to see how much stress is transferred into the ceramic part of a feedthrough.

Engineered point of failure for bone anchor

Stress evaluation of a modified bone anchor

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

An evaluation of the pressure in the path of drug delivery in a microneedle injection system.

Webinar Project- Carotid Artery Bifurcation
The project simulates the flow of blood as a non-newtonian fluid through a realistic Carotid Artery Bifurcation. Simulation are performed for 3 cases- of a healthy blood vessel  with no calcification or blockage and through an moderately and severely calcified or blocked blood vessel. 
The results show the differences in pressure, velocity profile and the outlet flow  through the 2 branches.

Flow conditions are based on a paper: STUDY OF BLOOD FLOW IN A BIFURCATION WITH A STENOSIS,
Sonia I.S. Pinto, E.D. Costa, J.B.L.M. Campos, J.M. Miranda

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project shows the sliding of a rubber seal on a rigid body due to applied displacement.

Public Profile

ftjulkins's profile