SimScale simulation projects by frankelwood3 | Page 1

frankelwood3's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The main Goal of this study is to find the final max forces that a design of a robotic arm will be able to withstand.  
What is the highest stress point on the assembly design

The following design is for a Pressure vessel that will hit 35 PSI, the safety factor needs to meet real close to a factor safety of 3.

Robot Arm Design

The Main Design Goal
Produce the design of a Robotic Arm Design that can Take the force of 30-40 pounds force at the end of the robot arm.


Project Design is produced for the  study of a robotic arm design for a Advanced Solid Modeling Class,  Studying the comparison of the  FEA studies in Simscale, Fusion, Solidworks, Creo and Nastran.  The image below shows the Studies final assembly of the design.

Public Profile

frankelwood3's profile