SimScale simulation projects by ferditekin | Page 1

ferditekin's profile

Turbulence Test: 4Px 1Py 8Pz Single Periodical Pillar Jet.

Y velocity,
X velocity,
Z velocity,
Temperature,
Pressure,
Density. 

Since the design is prepared by hand, there is a little difference in the angularity of the X coordinates relative to the right and left parts of the design. You can evaluate the results as 2*Result (Jet Body / 2, from given 2D picture).

Meshing test for 2 pills of 418 SPPJet.  Internal, external, base box, refinements for ideal resolution.


If you are having problems with Base_Box meshing/facing/covering/coating depending on your model, you can do Base_Box meshing/facing/covering/coating work on this model.

Turbulence Test: Under Water: 4Px 1Py 8Pz Single Periodical Pillar Jet

Velocity Body:  X, Y, Z, All XYZ. 
Velocity Nodes:  X, Y, Z, All XYZ.

Turbulence Test: 4Px 1Py 8Pz Single Periodical Pillar Jet.

Almost all the necessary tests are completed. Tested in ALL XYZ, X, Y , Z. There are preparation stages in previous tests. At the same time previous test results (Tests: 3, 4, 5, 6, 7_1) are not bad.

Meshing test for 418 SPPJet. Internal, external, base box, refinements for ideal resolution.

If you are having problems with Base_Box meshing/facing/covering/coating depending on your model, you can do Base_Box meshing/facing/covering/coating work on this model.

Public Profile

ferditekin's profile