SimScale simulation projects by fcastillo912 | Page 1

fcastillo912's profile

Tutorial project for linear static analysis of a crane

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project aims to showcase the different configuration options for the standard meshing tool, including basic and advanced settings. The various refinements are also covered.

F1 Front Wing Geometry for Frontwing Tutorial

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

Thermal Analysis of a Differential Casing

Empty project containing the geometry of an engine piston for the thermomechanical tutorial of an engine piston

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

fcastillo912's profile