SimScale simulation projects by ess031 | Page 1

ess031's profile

Analyzing a rocket-boosted lifting body intended as a testbed aircraft.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Designing an FPV race plane with the cleanest possible airframe. Only the base minimum drag will be accepted.

Analyzing and optimizing custom RC landing gear.

Determining efficacy of winglets on MQ-9 Reaper

Analysis of an RC F/A-18D and how drag on the model can be reduced.

The goal of this project is to determine whether or not difficult-to-recycle plastics can be made into an FPV quadcopter frame.

Research regarding a release mechanism for R/C aircraft to minimize drag,

Public Profile

ess031's profile