SimScale simulation projects by ejohnathon | Page 1

ejohnathon's profile

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Testing a longer span wing to see if lift matches vehicle weight

Seeing if the vortices generated by the propeller will cancel out the wing tip vortices for improved efficiency and flight time on a Quadrotor Biplane.

Validation of a NACA0010 profile using SimScale

Testing the fluid dynamics and air flow of the small QBP

Testing to see if the vortices generated by the prop will cancel out with the wing tip vortices.

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Just curious to see what this would look like in a cfd

Going to try and make a wortman airfoil using a rotary propeller

Taking a look at the flow generation created with this new design.

Testing wind flow inside a concept window fan assembly

Seeing the airflow of the University of Maryland

Testing the rotation zone advanced feature with a 8038 prop at 6500 rpm.

Public Profile

ejohnathon's profile