SimScale simulation projects by echarnock | Page 1

echarnock's profile

2nd attempt: Results, successfully managed to produce a simulation of the airfoil at a number of the angle of attacks, utilizing course 2

Redo, 15/ 16-20, only partial trace and at an angle.  Velocity (all), Turbulence and especially pressure. ADD in top views, were I have cut the wing via the z angle and am able to see wind vortices through x-velocity, one shpuld flow left and slow down or speed up anothe r on  the right does the oppisert of the left and cherck, 0 degress 15 degrees and 20 degress

Eli's 1st airfoil attempt. Results are: This is were I an into much trouble utilizing the program and were many errors were made.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Hopefully a successful one, also air density is at 6000 meters which equals 0.6601  (kg/m3)

Public Profile

echarnock's profile