SimScale simulation projects by ebindon | Page 1

ebindon's profile

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

What is the loss for just one disk spinning with no input or output

what is the best ratio of disk to diameter

trying to get tesla turbine to work in CFD.  Many mesh failures

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

part of turbine with smaller out / in nozzle

Try to determine total pressure at mass flow

Incompressible Fluid Flow analysis of two globe valves

Public Profile

ebindon's profile