IA04Q02_v1_20200410_v1

About this project

Improved simulation with less than 1000s needed to converge. Coarse mesh, pitch up 10 Deg with -5 Deg canard trim. Still need to redo mesh finer as this is too coarse on the leading edges. Used CFD Hex. Prior K & omega fixes in initial values, ux also, plus use potential flow set to yes - converged quickly (1000s). Still running only half-model 40 kts, 0 Deg Roll, now 10 Deg Pitch up, 0 Deg Yaw - need to update to multiple angles pitch first, then full with yaw, roll etc. and speeds upto 400 kts. Need to recheck air properties also - want Denver, summer. Original geometry, IA04Q02_20191227 updated 20200410. No props or impulse discs yet.