SimScale simulation projects by dhyre | Page 1

dhyre's profile

1mm thin top plus 4 additional 1mm plates to compare to a one-piece top

3mm was more than enough, 1mm not, see if 2mm is ideal

Half-supported 3mm didn't flex much 6um, how does 1mm do

Simplistic static thermal model of 2-piece system with air in void

Now using 3 separate domains for heat transfer

Take a modified version of the pressure plate and raise the temperature, with degraded metal strength

Usual test case with 0.5mm backplane but using aluminum

Basis 3mm stainless-steel supported plate under pressure of 15 bar, for comparison with 4 thicknesses and multiple materials

Trying to match test case using multiphysics

Doing my own validation run of the 1/8-sphere pressure vessel

Looking at displacement in a regularly-supported flat plate under pressure

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

dhyre's profile