SimScale simulation projects by dheepan_mk | Page 1

dheepan_mk's profile

45 deg bend model is changed slightly for pointing

EC 4mm with 10deg inclination and 45deg bend at ends

Diffuser with 10deg inclination with EC 4mm

Diffusers with 70mm height and 0deg inclination

Trying expander with 50mm-70mm loft at 30deg inclination

Computation of the thermal comfort and flow field inside a car cabin

Covered container for fulfilling air domain

Cylindrical Diffusers with 10deg inclination

Optimized cyl diffuser with 20deg inclined at the ends

Cylindrical diffuser with 60 mm spacing-75mm

3 diffuser oriented in Y axis with taper at ends and rect block in middle

Diffuser with tapers at end and rect block in middle

Computation of the thermal comfort including Local Mean Age of Air and radiation in a meeting room using CFD simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

dheepan_mk's profile