The project titled "Optimization of Wing Body Junction of a Supersonic Aircraft" was conducted by aeronautical engineering students Ajay Kumar K, Deepak Sathya S, and Kevin Andrew S at the Sathyabama Institute of Science and Technology. Operating at flight regimes between Mach 2.0 and Mach 8.0, high-speed aircraft suffer from severe compressibility phenomena at the wing-fuselage intersection, including 3D shock-wave/boundary-layer interactions (SWBLI), horseshoe vortex formation, interference wave drag, and localized stagnation heating. Using a five-stage Design Thinking methodology (Empathize, Define, Ideate, Prototype, and Test), the team evaluated six candidate blending profiles using modified Newtonian impact theory, Rayleigh pitot relations, and Sutton-Graves heat flux equations. The selected configuration (WBJ-OPT-1) features an aerothermodynamically optimized double-curved Sears-Haack ogive fairing integrated with a 30 mm tangent spherical nose tip. Structurally and thermally, the module integrates a Carbon/Carbon leading-edge cap, a 12 mm to 5 mm graded ablative Thermal Protection System (TPS) layer, a 3 mm quasi-isotropic CFRP structural shell, internal aluminum/titanium ring frames, and a titanium 24-bolt joint bulkhead. Analytical and numerical validation confirmed a 22.4% reduction in pressure wave drag ($C_D = 0.0865$), a 68.4% reduction in peak stagnation heat flux ($1.37\text{ MW/m}^2$), a 1D transient back-face bond-line temperature of 305 K (well below the 450 K composite resin limit), and positive structural buckling margins of safety ($> +6.8$) under 20g limit dynamic loading.
by slilbaekslilbaek
deepak1234 created this project
The project titled "Optimization of Wing Body Junction of a Supersonic Aircraft" was conducted by aeronautical engineering students Ajay Kumar K, Deepak Sathya S, and Kevin Andrew S at the Sathyabama Institute of Science and Technology. Operating at flight regimes between Mach 2.0 and Mach 8.0, high-speed aircraft suffer from severe compressibility phenomena at the wing-fuselage intersection, including 3D shock-wave/boundary-layer interactions (SWBLI), horseshoe vortex formation, interference wave drag, and localized stagnation heating. Using a five-stage Design Thinking methodology (Empathize, Define, Ideate, Prototype, and Test), the team evaluated six candidate blending profiles using modified Newtonian impact theory, Rayleigh pitot relations, and Sutton-Graves heat flux equations. The selected configuration (WBJ-OPT-1) features an aerothermodynamically optimized double-curved Sears-Haack ogive fairing integrated with a 30 mm tangent spherical nose tip. Structurally and thermally, the module integrates a Carbon/Carbon leading-edge cap, a 12 mm to 5 mm graded ablative Thermal Protection System (TPS) layer, a 3 mm quasi-isotropic CFRP structural shell, internal aluminum/titanium ring frames, and a titanium 24-bolt joint bulkhead. Analytical and numerical validation confirmed a 22.4% reduction in pressure wave drag ($C_D = 0.0865$), a 68.4% reduction in peak stagnation heat flux ($1.37\text{ MW/m}^2$), a 1D transient back-face bond-line temperature of 305 K (well below the 450 K composite resin limit), and positive structural buckling margins of safety ($> +6.8$) under 20g limit dynamic loading.