Set up your own cloud-native simulation in minutes.Start Simulating Now
114
0
1 Geometry
1 Mesh
1 Simulation setup
1 ResultIn this project the flow of air through two inlets under steady state condition are studied.The turbulence created inside the injector are solved using K-Omega model.The behaviour of velocity of the fluid and pressure drop are also observed during the simulation.
by Jon_WildeJon_Wilde
1 Geometry 1 Mesh 1 Simulation setup 1 ResultIn this project the flow of air through two inlets under steady state condition are studied.The turbulence created inside the injector are solved using K-Omega model.The behaviour of velocity of the fluid and pressure drop are also observed during the simulation.
sghorpade created this project
about 10 years ago
cthangam copied this project
over 8 years ago
