SimScale simulation projects by coloredcoat | Page 1

coloredcoat's profile

Evenly spaced holes in small pressure drop flow

Heat to constant surface, measure temp at time and depth

It gets hot, it grows, creates stress at elbows

See if the turning vanes distribute better flow velocities through the cross section of the tower

See locations of turbulence and measure pressure at key locations

crippling check on skirt cutouts with reinforcing rings

Cut two holes in a skirt and reinforce them.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Constant velocity inlet, pressure distribution flow through sized holes.

Unmodified cone flow, open inlet, double volume gap at cone.

distributed flow through a funnel with holes

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

coloredcoat's profile