SimScale simulation projects by clbutler | Page 1

clbutler's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Removed gusset from V1 to determine its effectiveness in reducing defelection

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

3D printed part (PLA) for holding headphones, check for flex with 200g load

Public Profile

clbutler's profile