SimScale simulation projects by clarisa_pereira | Page 1

clarisa_pereira's profile

See the forces involved in the project we are designing

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Forced Convective Heat Transfer - Raspberry Pi

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

the same heatsink but investigating what a imprint is

estoy comprobando algo para un proyecto educativo

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Public Profile

clarisa_pereira's profile