SimScale simulation projects by cetusa700 | Page 1

cetusa700's profile

Thermal condactivity from LED matrix through Aluminium plate to steel Beam

LED Spotlight project, aiming a bring the temperature of the diodes of a LED spotlight design below the maximum allowed temperature of 100C. A Conjugate Heat Transfer v2.0 analysis is used.

Rail guide_Nylon (PA) 3d printed Rail guide_ amateur rocketry

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

cetusa700's profile