Other

SimScale gives you access to Public Projects, a library of free simulations and validations with a detailed setup and results that you can use as templates. | Page 120

Santiago Gamez thermal analysis of a custom Power Resistor.

I have a box in a fan, why the tissue is going down and not up?

Prueba de simulacion de física clasica 1

The goal of this project is to simulate the fluid flow through a 5×5 array of channels (25 channels in total) to analyze the velocity and pressure distribution across the entire cross-section. The simulation aims to generate full-sectional data for further analysis.
I will use an incompressible fluid flow simulation (CFD) to model the flow through the channels. The simulation will likely use a steady-state solver like simpleFoam to compute the flow field.
This project involves a geometry of 5×5 channels (42.5 mm × 42.5 mm × 800 mm) with 25 cylindrical holes. The objective is to perform a CFD simulation to study the flow behavior, including velocity and pressure profiles, within the channels. The simulation will include meshing the geometry, setting appropriate boundary conditions (e.g., inlet velocity, outlet pressure), and post-processing the results to extract full-sectional data for all 25 channels. The data will be used for further analysis and visualization.

Christian Mendez thermal analysis of a custom Power Resistor

Creating simulations for 2 blade propeller to design efficiently 

Goal is to simulate buble formation and priming/depriming a siphon