Multiphase

This analysis type is used to simulate the time-dependent behavior of fluid mixtures, for example air and water. The analysis is carried out using the VoF (Volume of Fluid) method which is a standard approach for the computation of multiphase systems. | Page 62

Three dimensional numerical modeling of free surface flow around an obstacle

In this project a multiphase flow simulation of a stirred reactor is demonstrated.

This project simulates the free movement of floating boat under a wave using 6 DOF motion.

Effects of the free surface on the hydrodynamic performance of a dolphin swimming close to the water surface. The CAD file is taken from: https://grabcad.com/library/dolphin-7

A two-phase (water-air) simulation of a waterfall

This projects contains a simple, two-dimensional simulation of a falling water column.

Typical Rocket Nozzle (Fluidic Simulation)

Similar project to @hermanowicz water tank project with simplified geometry

Simulation of the river flowing at the Fallingwater house by Frank Lloyd Wright.

CAD model is done by @quequen, explained in this thread: https://forum.simscale.com/t/collaborative-simulation-project-multiphase-flow-around-a-boat-hull/71/54

Simple test of water stream on angled surface. 

Water flow from the tank of a water closet down. Kind of a fun project but with a very interesting analysis on the shear stresses on the inside walls dependent on the different designs, showing a much better performance for the design introducing a rotational flow.

tentando observar o comportamento do combustivel no tanque

This project demonstrates a multiphase flow simulation of a waterfall.

This project simulates the rising of a bubble in fluid due to buoyancy.