Multiphase

This analysis type is used to simulate the time-dependent behavior of fluid mixtures, for example air and water. The analysis is carried out using the VoF (Volume of Fluid) method which is a standard approach for the computation of multiphase systems. | Page 59

This project simulates the free movement of floating boat under a wave using 6 DOF motion.

Predict the resistance and trim angle of a planing hull.

CFD Professional Training Exercise 4-Tank filling multi-phase

El análisis a realizar involucra un análisis transitorio multi-fase en régimen laminar del llenado de un
tanque de gasolina (parcialmente llenado de gasolina).

I want to transfer water by  siphon  phenomena.

In and outflow of water in contained tank system

Simulation of a microscopic fluid layer being deployed from a syringe

This simulation models the behavior of sea waves around a frigate.

This project simulates sloshing of fuel inside a moving fuel-tank.

Simulation of an Intakeport for Automotive

Study die swell phenomena for extrusion process

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Copy of Ali_Arafat

A Multi-phase flow simulation for filling of a vehicle fuel tank that is initially filled with Air.