Multiphase

This analysis type is used to simulate the time-dependent behavior of fluid mixtures, for example air and water. The analysis is carried out using the VoF (Volume of Fluid) method which is a standard approach for the computation of multiphase systems. | Page 4

Caso de burbujeo del trabajo de Sarache et al. (2021)

caso de inyección de aire en columna de liquido

CFD analysis of Stirred Tank Reactor with Multiphase

swirl injector
cold flow analysis
hot firing analysis

Stirred Tank Reactor Simulation with Multiphase Flow

Air injection in vertical water column: Experimental test and numerical
simulation using volume of fluid and two-fluid methods

Generic mixing tank to investigate the effects of wall baffles, impeller blade design, number and height of impeller blades on mixing effectiveness- achieving slurry homogeneity - fine solid particles floating on water.

Modify cziemke's model to force air out small lower outlets (cap end)

In this project a multiphase flow simulation of a stirred reactor is demonstrated.

Use different geometries for Static Mixer for Slurry Mixing optimization

Two open chambers with water subjected to different surface pressures.