Multiphase

This analysis type is used to simulate the time-dependent behavior of fluid mixtures, for example air and water. The analysis is carried out using the VoF (Volume of Fluid) method which is a standard approach for the computation of multiphase systems. | Page 35

Simulate a box dipped in a draining liquid

Liquid free surface calculation in rotating cylinder
SOLA-VOF method

Tutorial project for setting up a Multi-phase flow simulation

This project is based at the Maritime Research Institute Netherlands (MARIN). Experiments have been performed for breaking dam flows. The main objective is to capture the water-air interface developed during the experiment in a 3.22x1x1 tank with free surface.

obtain forces on the obstacle
Multiphase VOF

20mm x 20 mm x 4mm box inside a 40 mm x 40 mm x 8mm liquid filled container

Simulating the impact of different propeller geometries in mixing time and quality for a batch reactor