Multiphase

This analysis type is used to simulate the time-dependent behavior of fluid mixtures, for example air and water. The analysis is carried out using the VoF (Volume of Fluid) method which is a standard approach for the computation of multiphase systems. | Page 27

Multiphase simulation of Non-newtonian flow two axial-case2

Tutorial project for setting up a Multi-phase flow simulation.

Learning bthe Multiphase Simulation For SimScale

Multi-phase flow simulation. sample tank filling case setup. The channel is enclosed by walls on all sides with an open boundary for the top face. Initially there will be column of water in the fall area, while water enters from an Inlet and discharges into the column. The rest of the domain is filled with air as the base medium.

multiphase modelling with volumetric force

Tutorial - Multi-Phase Flow - Tank Filling

Wave Impact on an Offshore Oil-Rig Platform

PUCV Lab Project - Obstacles in Open Channel

CFD - flow  inside  riser - bubble ascension

The goal of the project was to demonstrate the hydraulic jump and find the height of the jump also compare simulation height with the calculated height. For this project, I used a multiphase simulation type (air and water).

A large eddy simulation of the breakup and atomization of a liquid jet
into a cross turbulent flow at various spray conditions

This is a project from simscale public library