Frequency

The Frequency analysis type is used to calculate the natural frequencies of constrained or free parts and assemblies. Besides the numerical value of the eigenfrequencies, the results provide insights into the deformation behaviour of the corresponding eigenmodes. | Page 30

Stationary and eigenfrequency analysis of a wrench

Goals:
A) Identify Resonance frequencies of the assembly
B) Obtain the frequency response when pack is subjected to acceleration loads of 3G with a frequency sweep from 30 Hz to 150 Hz
C) Obtain the Displacement and Stresses when Pack is subject to Shock Load of 30G for a time duration of 15 milliSeconds

Frequency Analysis Tutorial (1/2) Flange Bolt

le but est de faire l'analyse modale de la structure

Calculus of natural frequency of extrusion

2020-037 DYNAMIC ANALYSIS PROPYLENE_2021.01.07

pour voir l'effet sur les modes d'une masse et de son placement sur la structure

le but est de caractériser le paysage modal pour le confronter au spectre d'excitation et estimer le risque de résonance

le but est de voir l'influence des CL sur les modes

Frequency | SimScale Project Library | Page 30