Engineering Services

Regardless of the industries they are specialized in, engineering offices from all over the world are using the SimScale simulation platform to virtually test their design via a standard Web browser and deliver the best quality to their customers in less time. | Page 116

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

caso 01 - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy

Simulating the deformation of an anchored wire under pulling

Project goal is to transfer the petrochemical from three different facilities to Amiral

bigger opening on the right (220x90) and smaller on the left (136x76). 90° bend has Bend Radius: 100 mm inner, 338 mm outer

caso 01 - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy

abcbcbcbadwasfawsdawffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff

caso 01 - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy

模擬建築物周圍的風流動態，分析氣流分佈

caso 01 - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy

caso 01 - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy