Electronics & High Tech

From electronic chips and printed circuit boards (PCBs) to smartphones or computers, SimScale is the perfect tool for electronics simulation, enabling companies to ensure power optimization, durability, efficiency or thermal performance for their products. | Page 93

Simulación del ventilador del power stack (600 Pa, 750 m3/h)

Commande pid de bras manipulateur rigide 2ddl

This simulation aims a determining whether the temperature of the board of 2x 160W COB Series UV LED is below the recommended temperature of 40C  with a water cooling block running with 0.2m/s inlet velocity.

3D model from Philippe Cavalier (https://grabcad.com/library/water-cooling-led-heatsink-1) - Copy

Similar case to LBM of project 3 but includes some modifications (e.g, holes in the PCB). The LBM may have a filler resin

Simulation of the main dissipative components

Ran a transient CHT study with the IBM solver. Tried to figure out how long I have to wait without pouring cold water over the boiled egg until it's at a good temperature to eat. Also checked which temperature the boiled egg has after 10 minutes to intialize the cooling run. Thermal properties taken and comparison done to this amazing paper from university of Osnabrück.

Optimize Electronics Package Cooling with CFD