Electronics & High Tech

From electronic chips and printed circuit boards (PCBs) to smartphones or computers, SimScale is the perfect tool for electronics simulation, enabling companies to ensure power optimization, durability, efficiency or thermal performance for their products. | Page 89

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it. - Copy

Trabalho com objetivo de simular a temperatura de um pack de 12V - Copy

This project demonstrates the validity of the CHTv2 and IBM solver. through a Conjugate Heat Transfer (CHT) analysis of a battery pack.
 
Validation Experiment Reference:
A peer-reviewed publication on battery pack thermal validation  has been used as basis for this study (with reasonable assumptions and approximations): 
https://www.mdpi.com/1996-1073/10/8/1157 - Copy

Thermal analysis of cooling system of electronic appliances

Using convective heat transfer analysis to evaluate the cooling system of a data center. Different scenarios will be assessed. - Copy

A simple stack of phones with blocks between them. Will be updating as time continues and profits make due.

My DT A-Level Coursework airflow analysis - Air Pollution Sensor

Goal: Compare heatsink designs for cooling a single LED