Electronics & High Tech

From electronic chips and printed circuit boards (PCBs) to smartphones or computers, SimScale is the perfect tool for electronics simulation, enabling companies to ensure power optimization, durability, efficiency or thermal performance for their products. | Page 87

simulationg cooling capazity of a passive cooler

Simulate thermal dynamics of an enclosure

This project demonstrates the validity of the CHTv2 and IBM solver. through a Conjugate Heat Transfer (CHT) analysis of a battery pack.
 
Validation Experiment Reference:
A peer-reviewed publication on battery pack thermal validation  has been used as basis for this study (with reasonable assumptions and approximations): 
https://www.mdpi.com/1996-1073/10/8/1157

CPU Cooling simulation - heat transfer - Copy

Thermal Analysis of a power MOSFET with a heat SINK

CPU Cooling simulation - heat transfer - Copy - Copy

This project shows the transient thermal analysis of chips mounted on a printed circuit board (PCB). - Copy

determine how flow of custom head compares to stock

the goal of my project is to turn off the cylinder regulator when the lpg gas is leaked and also to turn on the buzzer

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

a simple direct die cpu cooler simulation

The goal of this project is to simulate the simplified version of the cooling system of the HP Workstation Notebook.
This is a Conjugate Heat Transfer (CHT) problem. Incompressible turbulent flow was assigned for the air flow. Two cooling scenarios are going to be investigated
1- Current cooling system 
2- External cooling fan assisted system - Copy

simulation on heat sink to efficintly cool pes units