Compressible

Find projects using the compressible analysis type here. | Page 41

This is the Design of a DualFanDuct for an AeroTitan inspired by Prusa.

Looks at the fluid dynamics of airflow through a Vacuum adapter made to fit onto my CNC router

To simulate parachute response from airflows of 20 m/s - 200 m/s

I have uploaded 2 geometries of Pitot Tubes with blockages. These are expamples of the geometries we will use, and show how we will vary the geometries between differente iterations. 90 percent blocked with 5 mm protrusion is a more advanced geometry (we would like to go up to 99 percent) and 50 percent blocked 1mm is a more reduced blockage.  the blockage percentage is determined as the ratio of inlet area vs blocked area (in our case a circle with 90 percent surface are as inlet area). Protrusion is the length this blockage extends past the static port entrance.

the windanalysis of a building near sear side of digha for semester 5 project .

4 Sims de Malla y 4 de VC para comprobar la independencia en el BWB central y lateral

Compressible | SimScale Project Library | Page 41