Compressible

Find projects using the compressible analysis type here. | Page 156

Flux d'air au passage d'une marche dans une tuyauterie

Creating a plastic bottle rocket and parachute release mechanism in order to simulate the optimal airflow patterns of the design.

Testing the aerodynamics of a flying wing glider

As a follow-up case for the  TurboFan engine case: https://www.simscale.com/projects/fsite/new_jet/, this project extends the study by using a compressible flow simulation.  It involves meshing a single-Shaft Turbofan Engine, and then simulating its' operation when facing an axial airflow of 150 m/s, while rotating with a velocity of 940 rad/sec (9000 rpm) . A Fan is used to bypass a large amount of air in the inside of the engine. For this case the typical Compressor, Combustion chamber and Turbine Stator were omitted, and only the Fan, Shaft, Shell and Turbine rotor were meshed and examined, in order to restrain the meshing requirements for complex, time consuming meshing and simulation. A steady state  flow simulation is executed to visualize the air flow through the components of the Turbofan, as well as the pressure and U magnitude distribution on the blades of the Fan and Turbine.

experimenting with different intake geometries to study flow compression and velocity changes.

fan shroud for part cooling in a E3D v6 based extruder

Compressible | SimScale Project Library | Page 156