SimScale simulation projects by carlitosamir | Page 1

carlitosamir's profile

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

modification of a public project including one second bubble of a different size.

In this project a static analysis of a beam und a gravitational load is demonstrated.

simulations of fluid drops  falling (gravity effect)

Tutorial modify, some changes about fluids, physics and geometry.

Aerodynamics performance of two propellers

Tutorial project for setting up a Multi-phase flow simulation

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project contains everything you need to work on the first homework assignment of the drone workshop

Tutorial for In-compressible Turbulent flow through a cyclone seperator

using the mesh of the propeller (from mesh tutorial) and include some rotating simulation.

This project simulates incompressible non-newtonian flow through a sudden expansion.

This project performs an uncoupled thermomechanical analysis of a fixed beam under changing temperature.

This project simulates the rising of a bubble in fluid due to buoyancy.

Drop deformation by gravity forces moving through  a constricted tube. The geometry was taken from a public project.

Fluid drop deformation between two parallel plates. The mesh was taken from other public project.

This project simulates incompressible flow through a Venturi Injector

Public Profile

carlitosamir's profile