SimScale simulation projects by bowmanp93 | Page 1

bowmanp93's profile

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm.

This tutorial shows how an incompressible turbulent airflow around a Formula Student vehicle moving in a straight line can be simulated.

This project simulates the crossbar impact of David Beckham's fastest kick clocked at 97.9 mph - 157.6 kph.

This  project analyzes the aerodynamics of a spoiler

to do rough aerodynamic analysis on a go kart

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Incompressible Fluid Flow analysis of two globe valves

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Tutorial: Incompressible turbulent airflow around a spoiler

First try I had issues right after the material selection for air.

Public Profile

bowmanp93's profile