SimScale simulation projects by bllbbdg | Page 1

bllbbdg's profile

Room with a cupboard at the corner under the inlet

The Solid Is narrowed down and the door is smaller.

The room is narrowed down and inlet and outlets are extruded

Showing how the object might effect the movement

The inlet is at the one of the corner and one outlet in the other room

One inlet at the top corner and one outlet in the other room

A room with one inlet and one outlet to show the air movement basically

The location of the outlet and inlet are changed and an column is added

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

bllbbdg's profile