SimScale simulation projects by bdaqui | Page 1

bdaqui's profile

This challenge is about designing your own lightweight design along with amazing renderings. The objective function is to reduce the weight of the wing without exceeding the maximum allowable deflection (+y direction) of 1 meter!

Video about the challenge: https://bit.ly/2TE3HPr

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Cover is offset by 0.005 meter, 2 snaps, 
Assumptions : Symmetric on both planes.
Only a quarter portion of enclosure is analysed. - Copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This tutorial aims to showcase how to set up a compressible analysis. An aircraft wing geometry is used.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this project, a thermal shock analysis of a globe valve is performed.

Wind Comfort Analysis in a sample city partly on a hill.

Simple simulation of the popular stacked ball drop experiment that illustrates the conservation of momentum and energy.

It can be observed from the simulation results that, as expected, the smaller sphere is pushed much higher than its original drop height.

Public Profile

bdaqui's profile